Vinduino R3

Recommended Programming Cable
A recommended programming cable (FTDI) is available at Amazon. Note that the required cable is a 3.3V signal level type.
Tue, 13 Aug, 2019 at 10:54 AM
Vinduino R3 Test Program
For the Vinduino board to work for your application, you will need to customize the programming. Standard the boards comes with a test program that sends se...
Tue, 13 Aug, 2019 at 10:58 AM
Low Power Library
When you first try compiling and uploading the code, you may find that you need to install a low power library to finish compiling. It can be downloaded fr...
Tue, 13 Aug, 2019 at 11:02 AM
Testing the Solar Charger
The battery charger is designed for Li polymer batteries and stops charging when the battery voltage reaches 4.2V. The charger is programmed for a maximum c...
Tue, 13 Aug, 2019 at 11:18 AM
Open Vino project instructions for RPI LoRa gateway
Mike Barrow of Costa Flores winery in Mendoza, Argentina, published a very detailed step-by-step guide how to build a soil moisture sensor network using Vin...
Sun, 18 Aug, 2019 at 9:22 PM
Adding more temperature sensors
You can add up to 3 temperature sensors without sacrificing Watermark sensor inputs. There is a standard pin reserved for a digital temperature sensor: pin...
Sun, 15 Mar, 2020 at 5:19 PM